Volvo XC90 2003-2015 Witter Swan Neck Towbar
VL37BS
Towbar Features
Electrics Coding
Coding is required to tell the vehicles ECU that a towbar is present so the towing electrics will function properly. This is done with a diagnostic tool, and may need to be done by the main dealers.
: Not Required
Ball Type:
Swan neck
Bumper Cuts
:
Bumper cuts are cut on the underside of the bumper.
None visible : the cut will not be visible unless you look up at the bumper from the ground.
Visible: the cut will be visible when standing behind the vehicle.
No cut: No cutting required.
Non Visible
Bypass Required
:
Many modern vehicles require a bypass relay for the towbar electrics to work correctly.
If your vehicle requires this relay then damage can occur to the cars electrics if one isn't fitted.
Our data is collected from the tow bar and tow bar wiring manufacturers with regards to whether your vehicle needs a bypass relay.
Yes
Shipping Cost
Fitting cost
- From
- £335.00
- £375.00
- £375.00
- £70.00
Additional Cost for MOBILE FITTING SERVICE*
*Estimated fitting cost only
Help & Advice
Description
Volvo XC90 2003-2015 Witter Swan Neck Towbar
Towbar demonstration video

KIT INCLUDES:
- 1 Cross Bar
- 1 Centre Strut with European facing to 94/20/EC A50-1
- 6 M12x90x1.75mm Bolts, Nyloc Nuts and Large Flat Washers (40mm O.D.)
- 6 Bushes (22mm O.D – 55mm long)
- 2 Side Plates
- 4 M12x40x1.75mm Bolts, 2 Nyloc Nuts and 2 Lock Washers
- 2 M12x45x1.75mm Bolts, Lock Washers and Flat Washers (30mm O.D.)
- 1 Exhaust Spacer
- 2 M12x100x1.75mm Bolts, Nyloc Nuts and 1 Flat Washer (25mm O.D.) (Grade 10.9. - Torque setting 139Nm)
- 1 Electrical Plate (ZEP2)
- 2 M16 x 50mm Coupling Bolts, Nuts, Lock Washers
Similar Products
Customers also bought
Reviews
11/09/2018, 11:23
23/07/2018, 19:44
Q & A
No FAQ found