Bumper cuts are cut on the underside of the bumper.
None visible : the cut will not be visible unless you look up at the bumper from the ground.
Visible: the cut will be visible when standing behind the vehicle.
No cut: No cutting required.
Many modern vehicles require a bypass relay for the towbar electrics to work correctly.
If your vehicle requires this relay then damage can occur to the cars electrics if one isn't fitted.
Our data is collected from the tow bar and tow bar wiring manufacturers with regards to whether your vehicle needs a bypass relay.
Volkswagen T6 Transporter Van/MPV 2015 Onwards Witter Flange Tow bar
For models produced from 2011 To guarantee an optimal fit of the bumper it is necessary to mount - 1 x plastic rail 7H0 807 723 - 8 x gasket 357 853 586 B - 8 x clip 701 867 299
- 1 Cross Bar with European facing to 94/20/EC A50-1
- 1 Coupling Packer
- 4 M12 x 40 x 1.75, Lock Washers and Flat Washers (40mm O.D.) and Special Nut Retainers with Square T Nuts
- 2 M12 x 40 x 1.75, Nyloc Nuts and Flat Washers (40mm O.D.)
- 2 Nut Insert plates
- 1 ZEP35 Electrical plate
- 2 M16 x 60mm Coupling Bolts, Nuts, Lock Washers
- 1 Towball Neck
Tow bar demonstration video