Coding is required to tell the vehicles ECU that a towbar is present so the towing electrics will function properly. This is done with a diagnostic tool, and may need to be done by the main dealers.
:
Required
Ball Type:
Swan neck
Bumper Cuts
Bumper cuts are cut on the underside of the bumper.
None visible : the cut will not be visible unless you look up at the bumper from the ground.
Visible: the cut will be visible when standing behind the vehicle.
No cut: No cutting required.
:
No
Bypass Required
Many modern vehicles require a bypass relay for the towbar electrics to work correctly. If your vehicle requires this relay then damage can occur to the cars electrics if one isn't fitted.
Our data is collected from the tow bar and tow bar wiring manufacturers with regards to whether your vehicle needs a bypass relay.
:
Yes
Model Exclusions:
Rockton
Towing Weight Kg
This is the maximum weight that the vehicle can tow.
:
2800
Nose Weight Kg
This is the maximum weight that the placed on the ball, ie the average adult bike weighs around 15KG, 15 x 4 = 60 KG and a cycle for 4 bikes is around 20KG = 80KG.
Return and exchange As a PF Jones customer, if you no longer want the items you have 14 days to cancel your order or inform us you would like to return the goods.
Hi I have a 2015 t5 without trailer prep. What's the difference between the 13 pin universal wiring kit and the dedicated one ? What the pros and cons to fitting either ? Also my van has rear sensors dose this make any difference to which Towbar can be fitted. Regards Jason
Hi Jason
If your vehicle has parking sensors i would suggest going for a detachable as we have had fixed towbars that have set off the parking sensors
the dedicated wiring wont void warranty and will switch off sensors when towing however this will need coding to the vehicle
the universal wiring will void any warranty on the vehicle and will just get you road legal and wont switch off any sensors e.t.c.
Kind regards
Ref VW Transporter tow bar - you say to guarantee an optimal fit of the bumper it is necessary to mount - 1 x plastic rail 7H0 807 723 - 8 x gasket 357 853 586 B - 8 x clip 7HO 867 299 01C
How much are these parts and are they in stock (Stoke)
Thanks
Rob
Asked by Rob Gleave | 13/07/2015, 12:43 | 1 answer(s)
Good Afternoon Rob
If the vehicle has the plastic bumper reinforcer then the replacement trims 1 x plastic rail 7H0 807 723 - 8 x gasket357 853 586 B - 8 x clip 7HO 867 299 01C are required
if the vehicle has he metal reinforcer then these parts not required
we only stock these items at Manchester but we can send them down to stoke
the parts would cost £40.00inc vat for everything required
Kind regards