Coding is required to tell the vehicles ECU that a towbar is present so the towing electrics will function properly. This is done with a diagnostic tool, and may need to be done by the main dealers.
:
Required
Ball Type:
Detachable
Detachable Type:
Quantum Horizontal
Bumper Cuts
Bumper cuts are cut on the underside of the bumper.
None visible : the cut will not be visible unless you look up at the bumper from the ground.
Visible: the cut will be visible when standing behind the vehicle.
No cut: No cutting required.
:
Non Visible
Bypass Required
Many modern vehicles require a bypass relay for the towbar electrics to work correctly. If your vehicle requires this relay then damage can occur to the cars electrics if one isn't fitted.
Our data is collected from the tow bar and tow bar wiring manufacturers with regards to whether your vehicle needs a bypass relay.
:
No
Towing Weight Kg
This is the maximum weight that the vehicle can tow.
:
1500
Nose Weight Kg
This is the maximum weight that the placed on the ball, ie the average adult bike weighs around 15KG, 15 x 4 = 60 KG and a cycle for 4 bikes is around 20KG = 80KG.
:
75
Jaguar X Type Saloon 2002-2009 Witter Detachable Towbar
Return and exchange As a PF Jones customer, if you no longer want the items you have 14 days to cancel your order or inform us you would like to return the goods.
Description
Jaguar X Type Saloon 2002-2009 Witter Detachable Towbar
Hi,
I own a 2009 X-Type Jaguar Saloon and live in Australia. I have a couple of questions regarding the Witter Detachable Towbar. Code J13BQ
The first question is that my trailer requires a 50mm (roughly 2 inch) diameter ball, I am wondering what diameter ball the Witter towbar has.
Also I wondering what is the ball height for a Witter towbar on a Jaguar X-Type Saloon, so I work out how the trailer will compare to the height of the towbar.
I am also looking to get the 7 pin Jaguar specific wiring kit with the Witter towbar. The towbar and wiring kit is to be installed by a qualified towbar fitter, could you please advise me if there is anything else I may need or be aware of to successfully fit the towbar.
Please contact me if you have any questions.
Regards,
Sean Squire
Asked by Sean Squire | 22/09/2014, 04:57 | 1 answer(s)
Hi Sean
The Witter tow bar has a 50mm ball
The ball height is 15mm below the tow bar mounting J see fitting instuctions
http://www.pfjones.co.uk/witter/J13AQ.pdf