Cart is empty
Iveco Daily Chassis Cab (3450/3750/4100mm) 2022 Onwards GDW Flange Towbar
Hover on image to enlarge
IV7316
Towbar Features
Electrics Coding
Coding is required to tell the vehicles ECU that a towbar is present so the towing electrics will function properly. This is done with a diagnostic tool, and may need to be done by the main dealers.
: Not Required
Ball Type:
Flange
Bumper Cuts
:
Bumper cuts are cut on the underside of the bumper.
None visible : the cut will not be visible unless you look up at the bumper from the ground.
Visible: the cut will be visible when standing behind the vehicle.
No cut: No cutting required.
No
Bypass Required
:
Many modern vehicles require a bypass relay for the towbar electrics to work correctly.
If your vehicle requires this relay then damage can occur to the cars electrics if one isn't fitted.
Our data is collected from the tow bar and tow bar wiring manufacturers with regards to whether your vehicle needs a bypass relay.
Yes
Model Exclusions:
60C-70C, Models With Optional Crossbeam
Note: Chassis Cab model with 3450/3750/4100mm wheelbase
Shipping Cost
Fitting cost
- From
- £335.00
- £375.00
- £375.00
- £70.00
Additional Cost for MOBILE FITTING SERVICE*
*Estimated fitting cost only
Help & Advice
Description
Iveco Daily Chassis Cab (3450/3750/4100mm) 2022 Onwards GDW Flange Towbar
Not for 60C-70C or Models With Optional Crossbeam For Towbar
Still unsure if this is the right bar for you?
Similar Products
Reviews
No posts found
