Toyota ProAce Van 2016 Onwards Witter Flange Tow Bar
Towbar Features
Bumper cuts are cut on the underside of the bumper.
None visible : the cut will not be visible unless you look up at the bumper from the ground.
Visible: the cut will be visible when standing behind the vehicle.
No cut: No cutting required.
Many modern vehicles require a bypass relay for the towbar electrics to work correctly.
If your vehicle requires this relay then damage can occur to the cars electrics if one isn't fitted.
Our data is collected from the tow bar and tow bar wiring manufacturers with regards to whether your vehicle needs a bypass relay.
Toyota ProAce Van 2016 Onwards Witter Flange Tow Bar
KIT INCLUDES
- 1 Crossbar
- 4 M12x45x1.75mm 10.9 Bolt and Washer
- 1 Left hand sidearm
- 1 Right hand sidearm
- 6 M8x30x1.0mm Bolts and Washers
- 4 M12x45x1.75mm 10.9 Bolt, Nyloc Nut and Washers
- 2 M16x50x2.0mm Bolts, Nuts and lock washer
- 1 Electrical Plate
- 1 Towball
Still unsure if this is the right bar for you?
Call
0161 872 4755
Collection Available from any of our 3 depots

Zone B INCLUDED IN ZONE B; AB1, 11, 12, 15 and 16, 24 and 25, PH1 - 11, PA 1-19 FREE
ZONE C HIGHLANDS £22.48
ZONE D N IRELAND £22.48
ZONE E EIRE/ISLE OF MAN, SCOTTISH ISLES £35.00
ZONE F ORKNEY AND SHETLAND ISLANDS £35.00
No posts found
No FAQ found

