Mercedes Sprinter Van 1995-2006 Witter Flange tow bar
Towbar Features
Bumper cuts are cut on the underside of the bumper.
None visible : the cut will not be visible unless you look up at the bumper from the ground.
Visible: the cut will be visible when standing behind the vehicle.
No cut: No cutting required.
Many modern vehicles require a bypass relay for the towbar electrics to work correctly.
If your vehicle requires this relay then damage can occur to the cars electrics if one isn't fitted.
Our data is collected from the tow bar and tow bar wiring manufacturers with regards to whether your vehicle needs a bypass relay.
- From
- £335.00
- £375.00
- £375.00
- £70.00
Additional Cost for MOBILE FITTING SERVICE*
*Estimated fitting cost only
Mercedes Sprinter Van 1995-2006 Flange Towbar
NOT SWB with step or Twin Rear Wheel
KIT INCLUDES:
- 1 Towbar Mainframe with facing to ISO 3853 (BS AU114)
- 2 Cleats
- 2 Side Mounting Plates
- 2 6mm Packers
- 4 M10 x 40mm Bolts, Nuts, Lock Washers and Flat Washers (20mm O.D.)
- 4 M12 x 30mm Bolts, Nyloc Nuts and Flat Washers (20mm O.D.)
- 4 M10 x 25mm Bolts, Lock Washers and Flat Washers (20mm O.D.)
- 8 M12 x 90mm Bolts, Nyloc Nuts, Flat Washers (20mm O.D.) and Flat Washers (40mm O.D.)
- 2 M16 x 50mm Coupling Bolts, Nuts and Lock Washers
- 1 Towball
Tow bar demonstration video

Still unsure if this is the right bar for you?
Call
0161 872 4755
Collection Available from any of our 3 depots
No posts found
No FAQ found