Cart is empty
Automatic Battery Charger - 12V 10A
Hover on image to enlarge
0-647-10
Batteries
Volts:
12 V
Description
Automatic Battery Charger - 12V 10A
12 volt 10 amp. , including sealed for life, gel and maintenance free. Features: micro chip controlled three stage charging, allowing the charger to be left permanently connected without harming the battery. On/off switch, detachable wall-mount brackets, supplied with crocodile clips and leads.
Additional information:
If the battery being charged is below 8 volts the charger will not detect the battery and will not start. Can use 0647-96/97/98/99 charging lead sets.
| Type | Automatic charger for lead-acid batteries |
| Charge control | 3 stage charging (Main 10 amp, Final 14.7 volt, Float 13.8 volt) |
| Input | 230 volt ac 50Hz |
| Output | 10 amp 12 volt dc |
| Battery type | 12 volt wet cell, Lead/calcium, Maintenance Free, Sealed, Deep cycle, AGM and GEL |
| Display | 4 single LED indicators (Power on, Main, Final and Float Charge) |
| Lead length | Charging lead 1.4m, mains lead 1m |
| Electrical protection | Reverse connection and short circuit |
| Protection | Indoor use only |
| Temperature range | 0˚C to 40˚C |
| Weight | 930g |
| Dimensions | l 110 x w 152 x h 42mm (exc. bracket or feet) |
| Compliance | CE, RoHS, WEEE |
Similar Products
Reviews
No posts found
Q & A
No FAQ found
