Eberspacher have looked to increase both the service life of the heaters as well as reducing both the running costs and the noise produced by the heaters when in use. They have done this by using the latest generation of brushless motors and by replacing the previous fuel pumps with a new improved silent one.
- Diesel air heater producing 2.2 kW heating power.
- Automatic continuous interior temperature.
- Comes with the new Eberspacher 802 modulating controller
- Low operating Noise
- Interfaces: CAN, LIN (only 12 V), S+
Uses the pioneering Eberspächer CAN bus technology, run your heater with the new EasyStart Pro
- Brushless motor
A new brushless motor has extended the service life to 5,000 hours, as well as reducing heater noise.
- Use of the latest EasyStart Pro and EasyStart Web control units
Easy to understand fault reporting via the EasyStart Pro panel, no more looking up fault codes.
- Starting capability down to –46 °C
No need to preheat the cabin with the vehicles heater, starts in the most coldest of enviroments.
- Stepless heating performance control
Automatic continuous interior temperature control with temperature pre-selection.
- Noise emissions reduced
Use of acoustically improved metering pump no more clicking noise from the fuel pump found on the old Airtronic units.
- Integrated altitude sensor:
- Automatic altitude adjustment up to 3,000 m- Optimized combustion
Complete kit contents;
- Latest Generation Eberspacher Airtronic S2 D2L 12V
- Eberspacher 802 controller
- Almost silent Fuel Pump 12v
- Warranty & Technical Info Booklet, which includes;
- Warranty Documentation
- Service Schedule
- Installation Checklist
- Installation Information
- Operating Instruction Book
- Technical data & CD
- Complete Electrical Wiring Harness with all required connections (4.8m)
- Please note - Wiring harness cannot be altered in anyway.
- Latest upgraded blue fuel pipe - 5.5m
- 60mm APK Ducting - 1 x 1m Length
- 60mm Airtronic Outlet Hood
- 60mm Directional Air Outlet w/ bracket
- 60mm Outlet Connector
- 60mm Ducting Clip - 50-70mm x 2
- 24mm ID Exhaust Pipe - 0.5m
- 24mm Exhaust End Cap
- Exhaust Clamp x 1
- Exhaust P Clip x 2
- Fixing Bolts, Screws & Clips for mounting
- Combustion Air Pipe - 500mm x 25mm ID
- Combustion Air Pipe End Cap
- Fuel Pump Holder
- Fuse Holder Kit inc Fuses
12 volt only.
Genuine Eberspacher UK heater kit including 2 years manufacturer UK warranty from the date of purchase.
What is not included
- No Floor Mounting Plate
- No Fuel Stand Pipe
- No Exhaust Silencer
IMPORTANT (ELECTRICAL SYSTEM):
These heater kits come with a dedicated CANBUS wiring loom which CANNOT be modified/altered in anyway without prior written instructions from Eberspacacher UK
No FAQ found