Cart is empty
12V Heavy Duty Split Charger - 200A
Hover on image to enlarge
AVSPC12
Description
12V Heavy Duty Split Charger - 200A
How It Works
When the engine is running, the Charge Guard senses the voltage and allows the charge through to the auxiliary battery. When the engine is switched off, the Charge Guard monitors the voltage from the starting battery into the unit. When the voltage drops to 12.5V (AVSPC12) or 25.4V (AVSPC24) the unit will separate and isolate both batteries. This means that equipment powered form auxiliary batteries cannot drain the starting battery.
Why You Need One
With today’s engine management systems and “intelligent” alternators you cannot use the charging light on the dash as a switch, also you cannot jump start most new vehicles without the danger of damaging the engine ECU. This unit then becomes cost effective.
Who Uses Them
Emergency vehicles where battery drain is a problem. Utility and council vehicles where multiple beacons/work lamps or power tools are being charged.
Emergency vehicles where battery drain is a problem. Utility and council vehicles where multiple beacons/work lamps or power tools are being charged.
The unit also has a one minute timer built in to eliminate damaging relay chatter cause by a flat auxiliary battery putting too much strain on the unit.
Specifications
Rating amps: 200 A
Size: 120 x 80 x 70
Studs size: M8
Quiescent current: > 1 mA
Switching voltages: 13.4V - 12.5V
Similar Products
Customers also bought
Reviews
No posts found
Q & A
No FAQ found
