Bumper cuts are cut on the underside of the bumper.
None visible : the cut will not be visible unless you look up at the bumper from the ground.
Visible: the cut will be visible when standing behind the vehicle.
No cut: No cutting required.
Many modern vehicles require a bypass relay for the towbar electrics to work correctly.
If your vehicle requires this relay then damage can occur to the cars electrics if one isn't fitted.
Our data is collected from the tow bar and tow bar wiring manufacturers with regards to whether your vehicle needs a bypass relay.
Toyota Rav 4 MK3 2006-2013 Witter Flange tow bar
inc. With door mounted spare wheel
- 1 Cross Bar
- 1 Sidearm (Right Hand)
- 1 Neck
- 1 Sidearm (Left Hand)
- 1 Chassis Joining Bracket (Left Hand)
- 1 Chassis Joining Bracket (Right Hand)
- 1 Spreader Plate (Left Hand)
- 1 Spreader Plate (Right Hand)
- 1 Rear Panel Bracket (Left Hand)
- 1 Rear Panel Bracket (Right Hand)
- 8 M12x35x1.25 Bolts, Lock Washer and Flat Washers (30mm O.D)
- 6 M12x35x1.75 Bolts, 4 off Nuts, Lock Washers and Flat Washers (30mm O.D)
- 6 M8x35x1.25 Bolts, Nuts, Lock Washers and 12 off Flat Washers (25mm O.D)
- 2 M12x70x1.75 Bolts, Nyloc Nuts and Bolt Caps.
- 1 Electrical Plate
- 2 M16x50x2.0 Bolts, Nuts and Lock Washers
Tow bar demonstration video